Micro Bulk CO2 tanks replace a cylinder rotation with permanent storage that lives in your building. Ours are high pressure and fully enclosed, which is the specific reason they do not bleed off gas between deliveries the way conventional bulk setups do.
Low-pressure cryogenic bulk systems hold CO2 as a very cold liquid. As it warms, pressure rises and a relief valve vents the excess. That venting is continuous, it is worst when the system sits idle, and it is gas you already paid for.
A high-pressure system does not work that way. It stays sealed, there is no routine venting cycle, and the delivered volume and the used volume stay close to the same number.
One system, built around one patented component. The high-pressure micro bulk CO2 system is the storage itself. The DS6000 Differential Diverter Valve is the patented part inside it that lets multiple cylinders behave as one enclosed bulk vessel.
Speak with a Territory Sales Manager
We measure real consumption across a real week of business, including your peaks.
Back-of-house, in a cellar, plant room or store room, with the fill box plumbed to an exterior wall. In most cases it takes up less room than the cylinder bank it replaces, because you are no longer storing full and empty bottles side by side.
Where the storage sits in an enclosed occupied space, life-safety monitoring goes in with it.
Micro Bulk CO2 storage installed permanently removes a whole category of recurring work: ordering, receiving, handling, storing and returning cylinders. A CO2 storage tank on site turns that into hours a week you get back.
The CO2 bulk tank also removes the failure mode that costs the most, which is discovering at peak that the bottle you thought was full is not.
Usually less than the cylinder bank it replaces. The assessment measures your available space before anything is specified.
Yes, when correctly installed with the monitoring and shutoffs that go with it. That safety layer is part of the install rather than an optional extra.
Yes. We fill and service low-pressure cryogenic bulk systems, and you do not need to change equipment to become a customer. Our usage assessment measures what gets delivered against what actually reaches your taps, so you can see how your current setup performs on your own numbers.
Yes. Plenty of sites start on the equipment they already have and move when the timing is right, usually at a remodel, a lease change or a jump in volume. We handle the storage, the install and the monitoring as one job, and your delivery schedule and your route crew stay the same through it.
We measure real consumption across a real week of business, including your peaks.
