The LogiCO2 central unit turns a scatter of individual sensors into one system. It controls up to twelve MK9 sensors, shows real time PPM from each, and gives you a single place to look instead of a walk around the building.
Twelve sensors covers most multi-room commercial sites, including multi-room cultivation facilities where each room needs its own monitored zone.
Life safety
An inspector asking what is installed, where, and at what thresholds is a much shorter conversation when there is one panel showing every zone live than when it involves walking the building checking individual devices.
It also matters operationally. A drifting reading in a room nobody has been into today is visible immediately rather than at the next service visit.
Speak with a Territory Sales Manager
Multi-room sites need a plan, not a box on each wall.
Sealed grow rooms are deliberately enriched above ambient, occupied by staff, and usually multiple in number. That combination is exactly what the central unit is for, and it also feeds the real time PPM readings the Grow CO2 Controller works alongside.
Life safety
A CO2 sensor control unit consolidates every monitored zone into a single readout. Instead of walking the building to check individual devices, you look at one CO2 central control unit and see live PPM from each sensor.
That matters twice: at inspection, where it turns a building walk into a single conversation, and operationally, where a drifting reading in an unvisited room is visible immediately.
Up to the twelve-sensor capacity, yes. If a facility expands past that, additional units cover the extra zones.
No. Each MK9 still alarms locally with strobe and horn. The central unit adds oversight and a single status point on top of that.
Multi-room sites need a plan, not a box on each wall.
